Hot Tub Mantenance

---

SPA 56 (Chlorine)

1. Once filled with water; Start up your spa
2. Add 1⁄2 bottle of Pelican Spa Metal Remover or Mineral Cartridge
3. Add 2oz Spa Brite-N-Clear
4. Test the water; Adjust the: Total Alkalinity to measure: (125-150ppm)
   pH (7.2-7.6) (Make sure you adjust the Alkalinity first because adding Spa Alkalinity will increase the pH as well as Alkalinity)
5. Add 1 oz pelican Spa 56
6. Let Spa run on high speed for 2-3 cycles with cover off (about 30-40 mins)
7. If foaming occurs, use pelican Spa Defoamer

Weekly Care

1. Add 1 oz pelican Spa 56
2. Test the total alkalinity
3. Test the pH
4. Add 2oz of Spa Brite-N-Clear
5. Shock your spa with 1oz ShoX Renew or Cense (When you use spa)
6. Clean your filter with Cartridge Degreaser - Filter Cleaner.

As Needed

1. If foaming occurs, use pelican Spa Defoamer
2. Drain, clean, polish and refill based on usage (approximately every 3-4 months)

*PLEASE BRING IN A SAMPLE OF WATER FOR A FREE ANALYSIS**